|
NEW
-- Model LP511 is the newest addition to the P511 family.
The Model P511 has been the neurophysiologists'
workhorse for extracellular recordings from nerve and muscle for
years. This new amplifier has touch-pad controls. EMG,
EEG, ECG and ERG are just a few of the types of signals that can
be recorded using the LP511.
This high performance AC amplifier features high gain, adjustable
filters, low noise and an output which is easily interfaced with
peripheral devices such as computers, oscilloscopes and recorders.The
LP511 provides built-in isolation for maximum safety.
The bench-top
unit is enclosed in a compact, rugged all-metal cabinet that is
easy to stack vertically or horizontally. Optional rackmount hardware
allows two units to be mounted side-by-side in a standard 19" rack
while using only 1.75" of vertical space. All
models require a Grass medical-grade regulated power
supply which provides highly regulated ±12 VDC.
For low impedance
electrodes, connection may be made directly to the LP511 via the
standard input cable supplied. An optional high
impedance probe provides an excellent interface for high impedance
microelectrodes.
|
| SPECIFICATIONS |
| Amplification |
| Amplification |
|
50
minimum to 50,000 maximum |
| Amplification
Settings |
|
4
settings of 5k, 10k, 20k, 50k and 50, 100, 200, 500 (with X.01 setting
of rear panel switch) |
| Filters
|
| Low
Filter |
|
2-pole
(-12 dB/octave): 0.1, 0.3, 1, 3, 10, 30, and 100 Hz |
| High
Filter |
|
4-pole
(-24 dB/octave):0.1, 0.3, 1, 3, and 10 kHz |
| Line
Filter |
|
Notch-type
filter (50/60 Hz), selectable with internal switch |
| Input
Characteristics |
| Input
Impedance |
|
20
Mohm, differential, 35 pF at connector per terminal |
| CMR
(Common-Mode Rejection) |
|
Adjustable
to 30,000:1 (90 dB) at 60 Hz |
| Noise |
|
High
Gain: 4 µV peak to peak, referred to input, inputs shorted, 3 kHz
bandwidth |
| |
Low
Gain: < 60 µV peak to peak, referred to input, inputs shorted,
3 kHz bandwidth |
| Output |
| Type |
|
Single-ended,
clipped at approximately 10 volts peak to peak |
| Output
Impedance |
|
500
ohms |
| Output
DC Level |
|
Adjustable to
zero |
| Terminals |
|
Front
panel BNC |
| Calibrator |
| Range |
|
10,
100 and 1000 µV; ±2% accuracy |
| Internal
Calibration |
|
Touch-pad
actuated, DC voltage |
| Physical
Size |
| LP511 |
|
8.5"
W x 1.75" H x 6.2" D
(21.6 cm x 4.5 cm x 15.8 cm) |
| Weight |
|
2.5
lbs. (1.2 kg) |
| Regulatory |
| Safety |
|
IEC 60601-1,
2nd Edition (2000),
UL 60601-1 (2003),
CSA C22.2 No. 601.1-M90 |
| EMC |
|
FCC Part 15,
Subpart B, Class A, EN 61326:1998 Class A |
|
Model
LP511 Amplifier
|
| FEATURES
AND BENEFITS |
| •
|
Amplification
from 50 to 50,000
allows processing a wide range of AC bioelectric signals
|
| •
|
Low
Noise improves signal fidelity and resolution |
| •
|
Built-in
3-position Calibrator simplifies calibration and verifies
performance |
| •
|
7
High Pass and 5 Active 4-Pole Low Pass Filters tailor the
bandwidth to the signal, improve the signal-to-noise ratio and
optimize the A/D process |
•
|
Optional
High Impedance Probe provides interface for microelectrodes |
|
| ORDERING
INFORMATION |
| Model
LP511 |
|
AC
physiological preamplifier, bench-top cabinet, includes CAB-21572
input cable and manual (power supply required) |
| Model
RPS312RX |
|
Medical-grade
power supply for up to 12 channels,
bench-top style |
Model
RPS312RX-RM |
|
Medical-grade
power supply for up to 12 channels,
rackmount style |
|
Optional Accessories: |
| Model
SRS |
|
Stimulate/Record
Switching Unit |
| Model
HZP |
|
High
Impedance Probe, single channel |
| Model
CAB-21572 |
|
Spare
3-lead input cable, 8-foot length (2.4 m) |
| Model
CAB-21826 |
|
Power
supply cable for "daisy-chaining" power to additional
amplifiers, 1-foot length (0.3 m) |
|
Model LP5BT-1 |
|
Adjustable
bench-top stand
to mount one amplifier |
| Model
LP5BT-2 |
|
Adjustable
bench-top stand
to stack two amplifiers |
| Model
LP5RK-1 |
|
Rackmount
conversion kit to mount one amplifier in 19" rack |
| Model
LP5RK-2 |
|
Rackmount
conversion kit to mount two amplifiers side-by-side in 19" rack
|
| |
|
See
also: rackmount cabinets
and carts |
 |
|
