|
The P11T is an economical
transducer amplifier designed to amplify and condition signals from the
Grass FT03 Force Transducer
in animal studies. The compact design allows placement on a Tissue-Organ
Bath near the preparation. The unit provides transducer excitation, balancing
voltage, gain control and a transducer calibration circuit for simulating
a known force from the FT03. The output is displayed on a 3-digit LCD
Display. The P11T is powered from an external
power supply which will power up to eight of the P11Ts.
| ORDERING
INFORMATION |
| Model
P11T |
|
Compact
Transducer Amplifier |
| Model
P11T-F3 |
|
Compact
Transducer Amplifier with FT03 Force Transducer & interface cable |
| Model
P11T-P23XL |
|
Compact
Transducer Amplifier with P23XL Pressure Transducer & interface
cable |
| Model
RPS210 |
|
Power
supply for up to 8 P11T Amplifiers |
| Optional
Accessories |
| Model
159900 |
|
Side
mounting bracket for 1 P11T Amplifier |
| Model
P11TSB |
|
Stacking
brackets for stacking 4 P11T Amplifiers |
| Model
TAC-4 |
|
Spare
4-foot (1.2 m) shielded cable for FT03 and FT10 connection to: Model
P11T Amplifiers (provided with the Model FT03-T and FT10-T Force Transducers
and P11T-F3 Amplifier) |
| Model
TAC-5 |
|
Spare
1-foot (0.3 m) shielded cable for P23XL and P10EZ connection
to: Model P11T Amplifiers (provided with the Model
P11T-P23XL Amplifer-Transducer) |
|
| SPECIFICATIONS
|
| Input
|
| Input
|
|
DC
Coupled; 1 Mohm impedance, differential |
|
Connector |
|
7-pin
connector |
| Display |
|
3-digit
LCD Display |
| Balance
Voltage |
|
10
turn potentiometer, 2 mV/turn = ±10 mV |
| Amplification
|
| Gain |
|
Single
control provides a range of 100 to 30,000 |
| Filters |
| Low
Pass |
|
Selectable
with internal jumper; 10, 30 or 100 Hz
|
| Stability
|
| Stability |
|
Drift
typically 1 µV/hour, or 5 mg/hour with FT03
|
| Output |
| Output
|
|
±5 volts maximum via rear panel BNC connector at 500 ohms impedance
|
| Noise |
|
<3
µV peak-to-peak RTI at 30 Hz filter |
| Power
|
| Power
Supply |
|
Universal
input 90-260 VAC capacity to power up to eight P11T amplifiers
|
| Physical
Size
|
| Physical
Size |
|
4"
W x 2.25" H x 4.5" D
(10.2 cm x 5.7 cm x 11.4 cm) |
| Weight |
|
0.9 oz. (25.2 g) |
| Mounting |
|
Threaded
Post for Universal Pole Mount
|
|
