No More Knobs - Just Point and Click
All amplifier and calibrator functions are completely controllable via a standard RS-232 port from almost any computer system.

Windows® Program Simplifies Setup
Included with the system is a simple Windows program for setting and saving amplifier parameters and controlling system functions.

Custom Cards Available for Special Applications
Cards are available for the most common recording situations. Special Cards are available for custom configurations. Electrode Switching Modules are also available for those applications that demand frequent on-the-fly switching.

Direct Connection to Recording or Acquisition Systems
A dedicated multi-pin Analog Out connector provides direct connection to chart recorders, tape recorders or computer data acquisition systems. With low output impedance and a ±5 volt swing, it is compatible with most recording systems. It also provides four uncommitted BNC connectors for additional input or output (oximeters, position sensors, triggers, etc.).

Rear Panel Connectors
All functions and connections are accessible via rear panel connectors including RS-232 IN and OUT for daisy-chaining systems and Analog OUT.

Completely Rackmountable
The basic system consists of a 19-inch rackmount bin which houses up to eight 4-channel amplifiers, a calibrator and electrode selector module and the controller module. A separate rackmount power supply provides power to the system.

Standard Electrode Boards and Cables
The system is provided with detachable miniature electrode boards and input cables having a total length of 17 feet (5.1 m). A mating connector is provided for analog output. Cable assemblies are optional. See Model 15 Ordering Information.