| Model
number |
cable
description |
for
use with |
cable
length |
|
MODEL
7, 78, 79 POLYGRAPH CABLES
|
| 8MB36X |
Input
Cable: Connect Mini Electrode Board to EEG/PSG - standard length |
Model
78 with expanded 36-lead
electrode selector |
14
feet (4.2 m) |
| 8MB36 |
Input
Cable: Connect Mini Electrode Board to EEG/PSG - standard length |
Model
78 with 24-lead electrode selector |
14
feet (4.2 m) |
| 8MB36XL |
Input
Cable: Connect Mini Electrode Board to EEG/PSG - specify length |
Model
78 with expanded 36-lead electrode selector |
length
special |
| 8MB36L |
Input
Cable: Connect Mini Electrode Board to EEG/PSG - specify length |
Model
78 with 24-lead electrode selector |
length
special |
|
F-7IC3/REV1 |
Input
Cable: Standard 3-terminal cable with G1, G2, COMMON, SAFELEAD connectors
|
Model
7P1, 7P122, 7P3, 7P511, 7P14
(rear panel) Preamplifiers |
16
feet (4.8 m) |
| F-7IC3I
|
Input
Cable: Current Limited 3-terminal cable with ISOGND for high risk
applications, SAFELEAD connectors |
Model
7P1, 7P122, 7P3, 7P511, 7P14
(rear panel) Preamplifiers |
16
feet (4.8 m) |
| F-7IC6I |
Input
Cable: Current Limited 6-terminal cable with ISOGND for high risk
applications, SAFELEAD connectors |
Model
7P4, 7P5, 7P6, 7P8 Preamplifiers
|
16
feet (4.8 m) |
| CAB-4284X |
Preamplifier
Input Extension Cable:
Mates with existing input cable |
all
Grass Model 7 Series Preamplifiers |
up
to 50 feet (15 m) |
| TAC-7 |
Transducer
Adaptor Cable: PT5, FT03, and FT10 |
Model
7P1, 7P14, and 7P122 Preamplifiers |
8
feet (2.4 m) |
| ACAB-SPA-1 |
Transducer
Adaptor Cable: Implantable Motility Strain Gages |
Model
7P1, 7P14, and 7P122 Preamplifiers |
8
feet (2.4 m) |
| CAB-51651 |
7DA
Jumper Cable connects 2 Driver Amplifiers (J1-J2) to single preamplifier
for simultaneous display of mean and pulsatile pressures, etc. |
Model
7DA Driver Amplifier |
22
inches (55.9 cm) |
| CAB-4332 |
7P10/7P20
Input Cables 7P4/7P44 External Trigger Cables. Right angle, mini phone
plug at each end |
Model
7P10 and 7P20, Model 7P4 and 7P44 |
30
inches (76.2 cm) |
| CAB-2541 |
Signal
Marker Remote Control Cable provides remote activation of event marker
via hand held pushbutton |
Model
SMT7 Event Signal Marker |
8
feet (2.4 m) |
| CAB-4336 |
Interface
Cable: Single-conductor Shielded Cable terminating in single right
angle mini phone plug at one end and bare lead at the opposite end |
Model
7 Preamplifier J6 auxiliary outputs to peripheral devices |
8
feet (2.4 m) |
| CAB-51653 |
Interface
Cable: 7P3 Integrator Output Cable to 7DA Driver Amplifier for simultaneous
recording of raw EMG and integrated EMG from a single 7P3 |
Model
7P3 Integrator |
22
inches (55.9 cm) |
| CAB-51653 |
Interface
Cable: 7P4 Tachograph Output to 7DA Driver Amplifier for simultaneous
recording of the basic ECG or pulse and heart rate signals from a
single 7P3 |
Model
7P4 Tachograph |
22
inches (55.9 cm) |
| CAB-51298 |
Interface
Cable: Oximeters & BiPap analog outputs to Grass PSG systems. 3.5
mm (9/16") tini-plug for connection to tini- jack. 376 adaptor provided
for connection to devices with 2.3 mm (3/32") micro-plug |
Model
7P1 and 7P122 Preamplifiers |
8
feet (2.4 m) |
| CAB-20333 |
Shielded
A/D Interface Cable: PolyVIEW Mini Phone Plug to Male BNC (order one
per channel) |
PolyVIEW
BNC adaptor box connection to Model 7 Polygraphs (J6 output) |
84
inches (231.3 cm) |
| CAB-20350 |
Shielded
A/D Interface Cable: PolyVIEW SRJ6 D-shell Output (8 channels maximum) |
PolyVIEW
A/D plug-in PC Board connection to Model 7J and later Polygraphs |
10
feet (3 m) |
| 7SR/J620 |
Shielded
A/D Interface Cable: PolyVIEW Tini-Jack Box provides D-shell output
(includes #CAB-4332 cables) |
PolyVIEW
connection to Model 7H and older Polygraphs |
n/a |
| CAB-20381-05 |
Shielded
A/D Interface Cable: Gamma, PolyVIEW PRO/32 25-pin D shell to 100-pin
header |
Gamma,
PolyVIEW PRO/32 BNC adaptor box connection to Model 7/78J and later
Polygraphs with 7SRJ6 connector, Model 7/78/79 Polygraphs with Model
7SR/J620 tini-jack box |
10
feet (3 m) |
