| PHOTIC
FLASH FOR PHOTIC ACTIVATION DURING EEG PROCEDURES
|
| Model
FLC-LTM64
The Model FLC-LTM64 is an arm-mounted photic stimulator that
is designed for photic activation of the EEG and routine clinical
procedures in visual evoked potentials. FLC-LTM64 generates
flashes of white light by means of a 96 light emitting diode
(LED) array which switchs on and off. |
| Luminous
Flux |
|
144.0
lumens (minimum)
182.4 lumens (typical)
230.4 lumens (maximum) |
| Luminous
Intensity |
|
43.2
to 86.4 candela (cd) |
Angle
of View at
50% of light intensity |
|
120°
|
| Duration |
|
5
ms |
|
Interfaces |
|
5-pin TRIAD male connector;
Power supply, controlling signal (trigger) |
| Flash
Rate |
|
Up
to 60 per second, externally controlled |
| Input |
|
TTL
level |
| Outputs |
|
TTL
level |
| Power |
|
12
VDC (±5%) |
| Compatibility |
|
For
use with AURA-LTM64 |
| Physical
Size |
|
Flash
Lamp:
8.25" W x 2.5" H x 2" D
(21 cm x 6.4 cm x 5.1 cm)
Weight: 7.1 ozs. (0.3 kg) |
| Regulatory |
|
MDD
93/42/EEC Class 1, EN 60601-1, EN 60601-1-2, IEC 60825-1:1993
+ A1:1997 + A2:2001 standard, CSA 22.2 #601.1 |
| Model
FLC-LTM64 |
|
Photic
Stimulator Kit includes LED unit, manual, and cable |
| Model
32795400 |
|
Replacement LED Photic Stimulator (only) |
| Model
CAB-22023 |
|
Spare
8-pin cable, 10-foot (3 m) |
Model
CAB-22023-15 |
|
8-pin cable, 16-foot (5 m) |
| Model
LH3-40 |
|
Flash
lamp holder |
| Model
ARM-LH3-40 |
|
Adjustable
Arm |
|
|
 |
|
FLASH LAMP HOLDER |
|
Model
LH3-40
The Model LH3-40 Lamp Holder consists of a heavy duty
base, mast and flexible arm. The floor stand is supplied with
both glides for stationary use and casters (with one locking
caster) for mobile use. Brackets are included with the accessories
to facilitate mounting the flexible arm on a wall or table.
Shipped unassembled — sets up in minutes. The LH3-40
uses a 1/4-20 thread standard camera mount for the flash lamp
mounting.
| SPECIFICATIONS |
| Physical
Size |
| Weight |
|
Base
& Mast:
24.2
lbs. (10.9 kg)
Arm: 1.6 lbs. (0.72 kg)
|
| Mast
Height |
|
34.5"
(87.7 cm) |
| Base
Diameter |
|
24"
(61 cm) |
| Arm
Length |
|
34"
(86.4 cm) |
|
|
| Adjustable
Arm (without floor stand)
The Model
ARM-LH3-40 adjustable arm with mounting adaptor is for use
with the Grass IT5/H, IT5/S, IT9, IT-10 or IT-11 mobile
carts.
|
|
|
