|
The PS40/R
Photic Stimulator is a rack-mounted photic flash stimulator,
consisting of a base power unit and a separate, lightweight
flash lamp. The PS40/C Photic Stimulator is the desk-top version.
The base unit is line powered (115 or 230 volts AC) and provides
the power and triggering circuits for the lamp. Flash rate
is externally controlled via a TTL level pulse. A monitor
indicator is included to verify lamp operation and rate. Sync
in and monitor out signals are available on the rear panel
with BNC connectors. The Model FLC-40/B Flash Lamp is connected
to the base unit with a 12-foot (4 m) flexible cable.
|
| Flash
Intensity |
|
Fixed,
approximately 0.7 joules |
| Flash
Rate |
|
Up
to 30 per second, externally controlled |
| Flash
Duration |
|
10
µsec |
| Flash
Tube |
|
Xenon |
| Input |
|
Sync
In: TTL level, minimum pulse duration 10 µsec |
| Output
Monitor |
|
Out:
variable 0 to 12 V positive, 8 ms minimum duration at 30% amplitude |
| Indicators |
|
Front
panel monitor light, flashes only when flash lamp lights |
| Power |
|
115
or 230 VAC, 50/60 Hz, 50 VA maximum |
| Physical
Size |
|
Rackmount
Unit: 19" W x 3.5" H x 8.5" D
(48.3 cm x 8.9 cm x 21.6 cm)
Weight: 7 lbs. 12 ozs. (3.5 kg)
Table-top Unit: 8.75" W x 3.5" H x 7.5" D
(22.3 cm x 8.9 cm x 19.1 cm)
Weight: 6 lbs. 6 ozs. (2.9 kg)
Flash Lamp: 6" W x 3.25" H x 6" D
(15.2 cm x 8.3 cm x 15.2 cm)
Weight: 2 lbs. 6 ozs. (1.1 kg) |
Environmental
Specifications |
|
Operations:
0 to 40°C, 10 to 90% RH, non-condensing
Storage: -20 to 60°C |
| Regulatory |
|
115 VAC: Certified to CAN/CSA C22.2, No. 601.1. Conforms to
UL 2601-1.
230 VAC: CE Mark to EN 84/539/EEC |
| Model
PS40/R |
|
Photic
Stimulator includes rackmount base unit, lamp, and power cord
(115 V, 60 Hz) |
| Model
PS40/R-220 |
|
Photic
Stimulator includes rackmount base unit, lamp, and power cord
(230 V, 50 Hz) |
| Model
PS40/C |
|
Photic
Stimulator includes tabletop base unit, lamp, and power cord
(115 V, 60 Hz) |
| Model
PS40/C-230 |
|
Photic
Stimulator includes tabletop base unit, lamp, and power cord
(230 V, 50 Hz) |
| Model
FLC-40/B |
|
Lamp
only |
| Model
PST-2100 |
|
Spare
replacement flash lamp bulb |
| Model
LH3-40 |
|
Flash
lamp holder |
| Model
ARM-LH3-40 |
|
Adjustable
Arm |
Model
CAB-21689-10 |
|
Dual
Photic Stimulator Cable, 10 feet (3 m), included with PS40/C
& PS40/C-230 |
|
Model
CAB-21689-25
|
|
Dual
Photic Stimulator Cable, 25 feet (7.5 m) |
Model
CAB-21689-50 |
|
Dual
Photic Stimulator Cable, 50 feet (15 m) |
Model
CAB-21689-75 |
|
Dual
Photic Stimulator Cable, 75 feet (22.5 m) |
Model
CAB-21689-100 |
|
Dual
Photic Stimulator Cable, 100 feet (30 m) |
|
|
|
Model
LH3-40
The Model LH3-40 Lamp Holder consists of a heavy duty
base, mast and flexible arm. The floor stand is supplied with
both Glides for stationary use and Casters (with one locking
caster) for mobile use. Brackets are included with the accessories
to facilitate mounting the flexible arm on a wall or table.
Shipped unassembled — sets up in minutes. The LH3-40
uses a 1/4-20 thread standard camera mount for the flash lamp
mounting.
| SPECIFICATIONS |
| Physical
Size |
| Weight |
|
Base
& Mast:
24.2
lbs. (10.9 kg)
Arm: 1.6 lbs. (0.72 kg) |
| Mast
Height |
|
34.5"
(87.7 cm) |
| Base
Diameter |
|
24"
(61 cm) |
| Arm
Length |
|
34"
(86.4 cm) |
|
|
|
Adjustable
Arm (without floor stand)
The Model
ARM-LH3-40 adjustable arm with mounting adaptor is for use
with the Grass IT5/H, IT5/S or IT9 mobile carts.
|
|
|
