| Model
PTAFLITE
|
 |
| •
|
Monitor
airflow and snoring via nasal pressure |
| •
|
Airflow
output |
| •
|
Snoring
output |
| •
|
Unfiltered
airflow output |
| •
|
Waveform
scale control |
| •
|
AC
compatible |
| •
|
No
battery required |
| •
|
Small
and lightweight
|
| SPECIFICATIONS |
| Sensor
Technology |
|
Pressure
Transducer |
| Output
Types |
|
Airflow
& Snore |
| Physical
Size |
|
1.38"
W x 0.58" H x 2.13" L
(35 mm x 15 mm x 54 mm) |
| Weight |
|
25
grams |
| Power
Source |
|
None
required |
| Airflow
Sensor Cannula Input Connector |
|
Single
female luer lock |
| Input
Pressure Range |
|
±25
cm H20 |
| Note:
Other specifications such as power requirements, and signal amplitudes
will vary according to polygraph specific sensor requirements.
|
| CANNULAS |
| •
|
High
performance design to optimize airflow and snore signals |
| •
|
Low
profile and comfortable |
| •
|
Hydrophilic
and antimicrobial filter |
| •
|
Maintains
the warranty on PTAF products |
| •
|
Single patient use |
|
Two styles of cannulas are offered for the PTAF2 and PTAFLITE transducers;
the Pro-Flow nasal and the Pro-Flow PLUS nasal/oral. Both provide
high quality data acquisition and patient comfort. The Pro-Flow
are availble in a single purpose and MultiPurpose version. The MultiPurpose
cannula provides the ability to monitor EtCO2. The Pro-Flow PLUS
retains the fit and convenience of the nasal style and offers a
patented oral sensor that assures detection of nasal and oral breathing.
|
These
devices are for diagnostic purposes only and not for use with or as apnea
monitors.
|
|
Model
PTAF2
•
High and low level outputs
• Unfiltered airflow output
• Filtered airflow output
• Snoring output
• Self-test output signals
• Remote control options
• Auto and manual gain
• Auto zero
• Differential pressure ports
• Filtered cannulas
• Battery life: 1000 hours
|
 |
| SPECIFICATIONS |
| Sensor
Technology |
|
Differential
Pressure Transducer |
| Output
Types |
|
Airflow
Unfiltered (airflow & snore)
Airflow - Filtered (airflow only)
Snore (no airflow) |
| Physical
Size |
|
2.76"
W x 0.95" H x 4.96" L
(70 mm x 24 mm x 126 mm) |
| Weight
(with battery) |
|
0.29
lbs. (130 g) |
| Power
Source |
|
Battery,
9-volt alkaline |
| Battery
Life (calculated) |
|
1000+
hours |
| Airflow
Sensor Cannula Input Connector |
|
Dual
female luer lock |
| Input
pressure range |
|
±25
cm H2O |
| High
level outputs (typical) |
|
2.0
volts peak to peak (±1 volt) |
| Low
level outputs (typical) |
|
600
µV peak to peak (±300 µV) |
| Output
Cable Length |
|
7
feet (2.1 m) (extensions available) |
| Note:
Other specifications such as power requirements, and signal
amplitudes will vary according to polygraph specific sensor
requirements. |
| ORDERING
INFORMATION |
|
Model PTAFLITE |
|
Pressure
Transducer Start-up Kit includes PTAFlite sensor module, Sensor
Cannula sample pack (1 each adult nasal/oral, adult nasal, pediatric
nasal, pediatric small nasal cannula) |
| Model
PTAF2 |
|
Pressure
Transducer Start-up Kit includes PTAF2 sensor module, Output
cable for airflow, output cable for snore, Sensor Cannula sample
pack (1 each adult nasal/ oral, adult nasal, pediatric nasal,
pediatric small nasal cannual), PTAF/CPAP Pressure Port adaptor
tubing kit, 9-volt battery, 1075 and 1078 airflow cables and
a 1075 snore cable |
| Model
1075 |
|
Spare Cable,
Low Level Output, 1.5 mm Connector for use with PTAF2 |
| Model
1078 |
|
Spare Cable,
High Level Output, 1/8 Male Phone Connector for use with PTAF2 |
| Remote
Control |
| 1288-025 |
|
Remote
Control with 25-foot (7.5 m) interconnect cable |
| 1288-050 |
|
Remote
Control with 50-foot (15 m) interconnect cable |
| 1288-100 |
|
Remote
Control with 100-foot (30 m) interconnect cable |
| 1288-200 |
|
Remote
Control with 200-foot (60 m) interconnect cable |
| Pro-Flow
Cannulas |
| Model
1259 |
|
Adult (60/case), 7-foot (2.13 m) connect tubing |
| Model
1263 |
|
Pediatric
(60/case), 7-foot (2.13 m) connect tubing |
| Model
1267 |
|
Pediatric
Small (60/case), 7-foot (2.13 m) connect tubing |
| Pro-Flow
MultiPurpose Cannulas |
| Model
PF1350A |
|
Adult,
30/case, 7-foot (2.2 m) connect tubing |
| Model
PF1346P |
|
Pediatric,
30/case, 7-foot (2.2 m) connect tubing |
| Model
PF1348PS |
|
Pediatric
Small, 30/case, 7-foot (2.2 m) connect tubing |
| Pro-Flow
PLUS Cannulas |
| Model
1295 |
|
Plus, Nasal/Oral
Adult 30/case |
| CPAP
Titration Kit |
| Model
1327 |
|
CPAP Titration
Kit for use between CPAP equipment and PTAF, includes 10 single-use
filters. |
| Model
1109 |
|
Replacement
CPAP Titration Kit filters, 10/pack |
| Model
1107 |
|
Replacement
CPAP Titration Kit filters, 50/pack |
|
|
