|
Model
1711
Test the following
parameters:
• Electrode continuity
• Sensor functionality
• Jack input
The ST-3 checks and verifies
electrodes and wires for continuity. Respiratory effort belts, snore
sensors, airflow sensors, and PLM sensors can be tested for output.
The square wave generator verifies channels of the polygraph, and
makes certain that the jackbox inputs and DC hi-level boxes are
functional. (Square wave output cables not included.)
|
| SPECIFICATIONS |
| Square
Wave Signal Output Amplitude & Frequency |
|
100
microvolts peak-to-peak, polarity changes every 2 seconds (~0.25Hz)
simulating EEG machine calibration outputs. When using high level
DC output cables this will be 0 to1 volt output level at the same
frequency. |
| Power |
|
9-volt
Alkaline battery |
| Physical
Size |
|
2.76”
W x 4.96” L x 0.95” H
(70 mm x 126 mm x 24 mm) |
| Weight |
|
130 grams (with battery) |
| Warranty |
|
1-year
warranty |
|
| ORDERING
INFORMATION |
| Model
1711 |
|
ST-3 Sensor
Tester Kit contains:
1710 ST-3 Sensor Tester
1315 Continuity
Test Wireset |
| Model
1710 |
|
ST-3 Sensor Tester |
| Model
1315 |
|
ST-3 Continuity
Test Wireset |
| Model
1075 |
|
ST-3 Square Wave
Output Cable
with 1.5mm Safety Connectors |
| Model
1076 |
|
ST-3 Square Wave
Output Cable
with 1/8" Male Phone Plug |
| Model
1081 |
|
ST-3 Square Wave
Output Cable
with 1/4" Male Phone Plug |
|
